Master Forge 1010048 Manual Del Usuario página 20

INSTALLATION INSTRUCTIONS
LP Gas
If your grill is for LP gas, the regulator supplied is set for 11 in. water column (WC) and is for
use with LP gas only. The factory-supplied regulator and hose must be used with a 20 lb. LP
gas tank.
LP GAS System
Contact your gas supplier for a special regulator for bulk gas that fuels other
appliances
Gas Consumption
Total consumption of this grill with the burner(s) on "HIGH":
gas
the Grill
Locating
Clearance to Combustible Construction
!
Warning: Do not place the grill under overhead, unprotected combustible surfaces.
A minimum clearance of 48 in. from the sides of the grill and a minimum clearance of 48 in.
from the back of the grill to adjacent vertical combustible constructions must be maintained.
This gas appliance is designed and certified for outdoor use only. Do not operate the grill
inside a building, garage, recreational vehicle, screened porch or any enclosed area. Keep
the grill away from windy areas but keep the grill in a well-ventilated area. Do not obstruct the
flow of combustion and ventilation air around the grill.
However, the manufacturer strongly suggests a 6 ft. clearance of the grill to combustible
constructions.
Clearance to Noncombustible Construction
A minimum clearance of 48 in. from the back of the grill above the cooking surface to
noncombustible constructions is required to allow the grill hood to open completely. A
minimum of 48 in. clearance to the sides of the grill above the cooking surface to
noncombustible constructions is recommended. The grill can be installed directly next to
noncombustible construction below the cooking surface.
Burner Type
Main Burners
Side Burner
20
BTU/HR
10,000 x 4
12,000 x 1
lowes.com/masterforge
®