Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
For Portable LP-Gas Connection
From front of the cart, place foot ring of 20 lb. tank into the hole in bottom panel. Make sure the tank
valve is in OFF position. Use the tank bolt to secure the tank in a fixed position. Use only a 20 lb. gas
tank (See LP Gas Safety Requirements on page 24 for additional information). It is unsafe to operate
the grill if the gas tank is not vertical, as seen in Fig. 24.
WARNING: The Type I connective coupling (see Fig. 25) supplied with your grill must
not be replaced with a different type of grill/tank connection system. Removal will
result in loss of warranty, gas leakage, fire and severe bodily harm.
Hand Wheel
Type I
Valve
The propane tank valve connection supplied with this grill incorporates four important safe
guards: Hand Assembly, Hand Disassembly, Excess Flow Control and Temperature-Activated
Shut-Off.
a. Hand Assembly:
1.Make certain the tank valve and all the appliance valves are in the "OFF" position.
Fig. 23
External
Thread
Fig. 25
18
Thermally Sensitive
Nut
Fig. 24
Propane
Regulator
lowes.com/masterforge
®
Capítulos
Tabla de contenido
