koban KPA-11 Instrucciones Operativas página 63

KPA-11
1000A AC CLAMP METER
For Resistance tests, read the resistance on the LCD
5.
display.
For Continuity tests, if the resistance is < 100 , a tone
6.
will sound.
Diode Measurements
1. Insert the black test lead banana plug into the negative
COM jack and the red test lead banana plug into the
positive diode jack.
2. Turn the rotary switch to the
3. Press the MODE button until "
display.
4. Touch the test probes to the diode under test. Forward
voltage will indicate 0.4V to 0.7V. Reverse voltage will
indicate "OL". Shorted devices will indicate near 0mV
and an open device will indicate "OL" in both polarities.
12
Red
Red
Probe
Forward test
•))) position.
" appears in the
Black Black
Probe Probe
Reverse
www.grupotemper.com
