Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Telescoping Pole
Cover Assembly screw
electrical
Cover
FIGURE 6
16. Install the fourth Cover Assem-
bly Screw. Tighten all four Cover
Assembly Screws to attach the
Electrical Cover to the bottom
of the Cast Iron Base.
17. Hold the wall plug out of the
way and stand the fan upright.
18. Remove the upper left Grille
Mounting Screw from the Mo-
tor Face. See Figure 7.
upper left Grille
Mounting screw
flat Portion
Motor shaft
Grille Mounting screws
FIGURE 7
41973-01 03/08/2006
19. Loosen the three remaining
Base
wall
Plug
Keyslots
20. Rotate the Back Grille clockwise
21. Reinstall and tighten the Up-
Grille Mounting Screws. Align
the three keyhole slots in the
Back Grille with the three re-
maining Grille Mounting Screws
in the Motor Face, and place the
Back Grille onto the Motor Face,
ensuring that the Grille Mount-
ing Screw washers are between
the screw head and the Back
Grille. See Figure 8.
FIGURE 8
to situate the screws in the nar-
row ends of the keyhole slots.
per Left Grille Mounting Screw
and tighten the three remaining
Grille Mounting Screws.
continued
Tabla de contenido
