Checklist - Husqvarna TC 242T Manual De Operario

TO INSTALL BAGGER PRESENCE LEVER
(See Fig. 12)
WARNING: Shut off tractor engine and engage
parking brake before installing the bagger
presence lever.
• Position bagger presence lever (1) on backplate with
anti-rotation tab in slot on backplate and align with
mounting hole.
• Attach bagger presence lever to the backplate using
screw (3) and nut (2) and tighten firmly.
2
TO INSTALL TOW HITCH (See Fig. 13)
• Remove screws from tow hitch. Save for future use.
• Slide tow hitch through slot in backplate as shown.
• Align holes in tow hitch with the holes in the backplate.
Reinstall screws through backplate as shown. Tighten
securely.
SCREWS
SLOT
BACKPLATE
ASSEMBLY
3
1
Fig. 12
TOW HITCH
Fig. 13
✓
BEFORE YOU OPERATE YOUR NEW TRAC TOR, WE
WISH TO ENSURE THAT YOU RECEIVE THE BEST
PERFORMANCE AND SATISFACTION FROM THIS
QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST:
✓
All assembly instructions have been com plet ed.
✓
No remaining loose parts in carton.
✓
Battery is properly prepared and charged.
✓
Seat is adjusted comfortably and tightened securely.
✓
All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory.)
✓
Ensure mower deck is properly leveled side-to-side/
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling.)
✓
Check mower and drive belts. Ensure they are routed
properly around pulleys and inside all belt keepers.
✓
Check wiring. See that all connections are still secure
and wires are properly clamped.
✓
Before driving tractor, ensure free wheel control is in
"TRANSMISSION ENGAGED" position. (See "TO
TRANS PORT" in the Operation section of this man u al.)
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA
ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:
✓
Engine oil is at proper level.
✓
Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
✓
Become familiar with all controls, their location and
functions. Operate them before you start the engine.
✓
Ensure brake system is in safe operating condition.
✓
Ensure Operator Presence System and Reverse
Operation System (ROS) are working properly. (See
the Operation and Maintenance sections in this manual.)
✓
It is important to purge the transmission before op er at ing
your tractor for the first time. Follow proper starting
and transmission purging instructions. (See "TO
START EN GINE" and "PURGE TRANSMISSION" in
the Op er a tion section of this manual.)
9

CHECKLIST