Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
NOTE: You may now roll your tractor off the skid. Follow
the instructions below to remove the tractor from the skid.
_,WARNING:
Before starting, read, understand and follow
all instructions in the Operation section of this manual. Be
sure tractor is in a well-ventilated area. Be sure the area in
front of tractor is clear of other people and objects.
TO ROLLTRACTOR
OFF SKID (See Operation
section
for location and function
of controls)
•
Raise attachment lift lever to its highest position.
•
Release parking brake by depressing brake pedal.
•
Place freewheel control in disengaged position to dis-
engage transmission
(See "TO TRANSPORT"
in the
Operation section of this manual).
•
Roll tractor forward off skid.
Continue with the instructions that follow.
CHECK
TiRE PRESSURE
The tires on your tractor were overinflated at the factory
for shipping purposes. Correct tire pressure is important
for best cutting performance.
•
Reduce tire pressure to PSI shown on tires.
CHECK
DECK LEVELNESS
For best cutting results, mower housing should be properly
leveled. See "TO LEVEL MOWER HOUSING" inthe Service
and Adjustments section of this manual.
CHECK
FOR
PROPER
POSITION
OF ALL
BELTS
See the figures that are shown for replacing motion and
mower blade drive belts in the Service and Adjustments sec-
tion of this manual. Verify that the belts are routed correctly.
CHECK
BRAKE
SYSTEM
After you learn how to operate your tractor, check to see that
the brake is operating properly. See "TO CHECK BRAKE"
in the Service and Adjustments section of this manual.
_CHECKLIST
BEFORE YOU OPERATE YOUR NEW TRACTOR, WE
WISH TO ASSURE
THAT YOU RECEIVE
THE BEST
PERFORMANCE
AND
SATISFACTION
FROM
THIS
QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIS'I7
,/
,/
,/
,/
,/
,/
,/
,/
,/
All assembly instructions have been completed.
No remaining loose parts in carton.
Battery is properly prepared and charged.
Seat is adjusted comfortably and tightened securely.
All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
Be sure mower deck is properly leveled side-to-side/
front-to-rear
for best cutting results. (Tires must be
properly inflated for leveling).
Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.
Check wiring. See that all connections are still secure
and wires are properly clamped.
Before
driving
tractor,
be sure freewheel
control
is in "transmission
engaged"
position
(See "TO
TRANSPORT" in the Operation section of this manual).
WHILE LEARNING HOWTO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLLOWING IMPORTANT
ITEMS:
¢"
¢"
¢"
¢"
¢"
¢"
Engine oil is at proper level.
Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
Become familiar with all controls, their location and
function. Operate them before you start the engine.
Be sure brake system is in safe operating condition.
Be sure Operator Presence System and Reverse Op-
eration System (ROS) are working properly (See the
Operation and Maintenance sections in this manual).
It is important to purge the transmission before operat-
ing your tractor for the first time. Follow proper starting
andtransmission
purging instructions (See "TO START
ENGINE" and"PURGE TRANSMISSION" in the Opera-
tion section of this manual).
6
Tabla de contenido
