Allmatic AX100 24V Manual Del Usuario página 10

ENG
Fixing the brackets to the post and gate
Once you have verified the op mum condi ons for placing the plates and their alignment (fig. 2), fix them
defini vely to the post and gate, either welding them or using expansion bolts (on masonry posts).
Caution: The engine
must be mounted
perfectly horizontal
.
Bracket fixed to the gate
FIGURE 2
Bracket fixed to the post
Fixing the gear motor
Lock the gear motor at the back with a hex head screw and rela ve nut and washer .
FIGURE 3
place the gear motor frontwards with the hex head screw and rela ve nut and washer.
FIGURE 4
6-1624028 rev.6 05/07/2013 10 / 22
ITA ENG FRA ESP DEU POR