Kohler K-705700 Guia De Instalacion página 18

Hinge
Hinge Cover
13. Finish the Installation
Slide the hinge covers over the back plate of the top and bottom door panel hinges.
Remove all temporary masking tape from the bottom track.
IMPORTANT! Carefully follow the silicone sealant manufacturer's instructions for application and curing
time.
NOTE: Thoroughly clean and dry all dust, dirt, and grease from the bottom track and shower ledge
surfaces where silicone sealant will be applied.
NOTE: Placing a small weight on the bottom track to hold it flush to the track while the sealant cures can
help.
Use masking tape to protect areas adjacent to those where the sealant is being applied.
Apply sealant to the outside of the shower where the bottom track meets the threshold.
Apply sealant to the outside of the area where the wall jambs and brackets meet the walls.
Allow the sealant to fully dry before operating the door. Refer to the sealant manufacturers
instructions for recommended curing time.
1064866-2-B 18 Kohler Co.