INSTRUCTIONS FOR USE
6.
To change the mode, while the unit is on/operating, press and
hold the '+' for 3 seconds; the mode will switch to the next in
the sequence of Mode 1 to 8. As you press and hold the button,
the green light will illuminate 2x and the device will beep 2x to
indicate the change in mode type.
The sensation should be strong but comfortable; press the + or –
7.
button at any time during the treatment to change the intensity
as desired.
8.
The device will pulse for several seconds, pause and resume
repeatedly until the treatment is finished
9.
The device will automatically shut off after 30 minutes of use.
To discontinue use prior to the end of treatment time, press and
release the POWER button to shut the unit off.
Do NOT attempt to remove the device during operation.
10.
Be sure the device is OFF (no sensation is felt) before removing
the device from your skin. Take care during removal to best
protect the adhesive and preserve the life of the electrode pad.
11.
Place the plastic cover over the gel pads to prevent them from
drying out. Store the device in the included storage case.
12.
To conserve the battery and prevent shocks, the device will
automatically power off when not in use.
30 • ENGLISH