Tabla de contenido
CEILING INSTALLATION LOUDSPEAKER
SPECIFICATION - TNi-C4
100V Transformer Power Taps
70V Transformer Power Taps
Enclosure
Main Construction Material
Single Carton dimensions (HWD)
Master Carton dimensions (HWD)
In the interest of continued development, HH reserves the right to amend product specification without prior notification.
For polar plots, EASE modelling files, 2D and 3D drawings files, please check www.hhelectronics.com
1 AES standard Pink Noise 12dB crest factor 2 hours.
2 Measured in Full space (4π) conditions
3 Calculated maximum SPL based on rated power handling
4 Average coverage between 500Hz - 4KHz
© 2021 HH Electronics Ltd
Model
TNi-C4
Woofer Size
4 inch
Woofer Cone Material
Polypropylene With Rubber Edge
1.5 inch Neodymium
Tweeter Size
30W, 15W, 6W
15W, 7.5W, 3W
8 ohm
Low Impedance
1
40W AES, 160W Peak
System Power Rating
Recommended Amplifier
80-160W @ 8 Ohms
2
88 db SPL
Sensitivity 1W/1m
3
110 dB SPL
Max SPL 1m
85Hz - 20KHz (-10dB)
Frequency Response
100Hz - 16KHz (-3dB)
Input Connector
Push Spring Connectors
4
130° conical
Nominal Coverage
Outside Diameter
204mm, (8")
156mm, (6.1")
Depth
Cutout
180mm, (7.1")
Installation Grip Range
4-20mm
ABS Plastic
Grille Main Material
1.5mm Circular Mesh Steel
Finish
White
Mounting Points
3x Dog Ear Brackets
Unit weight
1.4Kg, 3.1 lbs
180 x 205 x 205mm, (7.1" x 8.1" x 8.1")
Single Packed weight
1.9Kg, 4.2 lbs
EAN Code
5060109457032
400 x 450 x 450mm, (15.7" x 17.7" x 17.7") (8pcs)
Master Packed weight
16.2Kg, 35.7 lbs
5060109457049
Master EAN Code
204 mm
Designed and Engineered in the UK by HH Electronics LTD.
156 mm
145 mm
10mm
155 mm
MINIMUM REQUIRED
INSTALLATION DEPTH
iNSTALL
REQUIRED CUTOUT
180mm
5
Tabla de contenido
