Tabla de contenido
CEILING INSTALLATION LOUDSPEAKER
The Tessen TNi-C range delivers premium audio reinforcement.
Designed with the audio installer in mind, the TNi-C range features high grade coaxial drivers and 4 position power tap
selector located under the front steel grille; providing swift output adjustment once the ceiling speaker is installed.
With connectivity for 70V/100V and 8 Ohm low impedance lines, the TNi-C range delivers a highly flexible solution. The spring
connection terminals ensure cables are secure once fitted and the dog ear mounts are a simple yet effective mounting method.
INSTALLATION GUIDE
1
CEILING CUTOUT
4
1: Choose a suitable location for the installation. Rear clearance and the structural integrity of
the mounting surface must be considered and anything else such as piping and cable that may
have previously been installed.
2A: Grill removal: Set one of the Mounting Arms (Out Position) as shown (A).
2B: Gently push the Mounting Arm in the direction shown.
2C: The speaker Grill Should lift allowing it to be easily removed.
3: Audio connection: Ensure correct polarity, especially if a 70V/100V line system is used.
4: Carefully position the Ceiling Speaker in the ceiling aperture after ensuring the mounting
arms are set as shown.
5A: Fix the speaker to the ceiling in place using three fixing screws for the TNi-C4 and four
for the TNi-C6 and TNi-C8.
5B: Power Mode. Set the output wattage and voltage line based on the connection setup.
See pages 3 and 4 for more information.
6: To complete the install, carefully fit the speaker grille.
© 2021 HH Electronics Ltd
2
5
A
B
7 0 V
8 Ω
8Ω
100V
Designed and Engineered in the UK by HH Electronics LTD.
3
C
A
B
_
+
6
iNSTALL
Adjustable Power Modes
can be accessed after
installation with the quick
switch options.
Quick Lock Mounting
Rotating locking lugs for
secure rattle free
mounting .
2
Tabla de contenido
