Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WARNINGS:
• IT IS DANGEROUS FOR ANYONE WHO IS NOT
AN AUTHORIZED SERVICE PERSON, TO CARRY
OUT REPARATIONS THAT IMPLY THE RE-
MOVAL OF GUARDS.
• TO AVOID THE RISK OF ELECTRIC SHOCK, DO
NOT ATTEMPT TO REPAIR THIS APPLIANCE
YOURSELF.
installation
location
• When selecting a location for your unit, make sure the floor is flat
and firm, and the room is well ventilated with an average room
temperature between 16 °C and 38 °C.
• Avoid placing the unit near sources of heat, such as a range,
heater or radiator. Also avoid direct sunlight because it will in-
crease power consumption. Extreme cold temperatures can also
cause the unit to malfunction.
• This unit is not designed for use in a garage or outdoors. Do not
cover the unit with any type of cover.
• When installing the unit, be sure to leave 20 cm of clearance on
both sides, 15 cm on the back and 20 cm on the top of the unit.
This will allow fresh air to circulate around the compartment and
improve the efficiency of the refrigeration process.
• The door can be opened to the right or left, depending on what
best suits your needs. Make sure there is enough space for the
door to open fully.
reversing the door opening
Tools required: Phillips screwdriver, flat screwdriver and hex
wrench.
Warnings:
• If you wish to reverse the door opening, we recom-
mend contacting a qualified technician. You may
carry out this procedure only if you know you are
qualified to do so.
• Make sure the unit is disconnected from electrical
power and empty.
17
Capítulos
Tabla de contenido
