Bosch Performance Line PowerPack 300 Manual Original página 33

– "– Time format +": The time can be displayed either in the
12 hour or 24 hour format.
– "– Shift recom. on/off +": You can switch the indication
of a shift recommendation on and off.
– "Power-on hours": Indicates the total travel duration with
the eBike (not changeable).
– "Gear calibration" (only NuVinci H|Sync): Here you can
calibrate the continuously variable transmission. Confirm
the calibration by pressing the "Bike lights" button. Then
follow the instructions.
In the event of an error, it can also be necessary to perform
calibration when riding. In this case, you also confirm the
calibration by pressing the "Bike lights" button and then
follow the instructions on the display.
This menu item is displayed only when the on-board com-
puter is in the holder.
– "– Start gear +": This is the starting gear which can be set
when using SRAM DD3 Pulse and Shimano Di2. The auto-
matic shift-back function is switched off in the "––" posi-
tion. This menu item is displayed only in connection with
SRAM DD3 Pulse and Shimano Di2. This menu item is dis-
played only when the on-board computer is in the holder.
Error Code Indication
The components of the eBike system are continuously and au-
tomatically monitored. When an error is detected, the respec-
tive error code is indicated in text indication d.
Press any button on the on-board computer 3 or on the oper-
ating unit 10 to return to the standard indication.
Code Cause
410 One or more buttons of the on-board
computer are blocked.
414 Connection problem of the operating
unit
418 One or more buttons of the operating
unit are blocked.
422 Connection problem of the drive unit Have connections and contacts checked.
423 Connection problem of the eBike
battery pack
424 Communication error among the
components
426 Internal time-out error
430 Internal battery pack of the on-board
computer is empty.
431 Software version error
440 Internal error of the drive unit
Bosch eBike Systems
– "Displ. vx.x.x.x": This is the software version of the
display.
– "DU vx.x.x.x": This is the software version of the drive
unit. This menu item is displayed only when the on-board
computer is in the holder.
– "DU # xxxxxxxxx": This is the serial number of the drive
unit. This menu item is displayed only when the on-board
computer is in the holder.
– " Service MM/YYYY": This menu item is displayed
when the bike manufacturer has set a fixed service ap-
pointment.
– " Serv. xx km/mi": This menu item is displayed when
the bike manufacturer has set a fixed service appointment
after a certain mileage has been reached.
– "Bat. vx.x.x.x": This is the software version of the battery
pack. This menu item is displayed only when the on-board
computer is in the holder.
– "Gear vx.x.x.x": This is the software version of the automat-
ic transmission. This menu item is displayed only when the
on-board computer is in the holder. This menu item is dis-
played only in conjunction with an automatic transmission.
Depending on the type of error, the drive unit is automatically
shut off, if required. Continued travel without assistance from
the drive unit is possible at any time. However, have the eBike
checked before attempting new trips.
 Trouble-shooting actions may be performed by the
owner except those explicitly noted as "Contact your
Bosch eBike dealer".
Corrective Measure
Check if any buttons are blocked, e.g. from dirt or debris. Clean the
buttons, if required.
Have connections and contacts checked.
Check if any buttons are blocked, e.g. from dirt or debris. Clean the
buttons, if required.
Have connections and contacts checked.
Have connections and contacts checked.
Restart the system. If the problem persists, contact your Bosch eBike
dealer. In this error status, it is not possible to display or adjust the wheel
circumference in the basic settings menu.
Charge the on-board computer (in the holder or via the USB port).
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
English–7
0 276 001 SPI | (3.6.15)