PNI SafeHouse HS600 Manual De Usuario página 23

Set phone number via SMS
Command Function
51 1st phone number
52 2nd phone number
53 3rd phone number
54 4th phone number
55
5th phone number
Syntax of the message to be sent:
*System password*Command107xxxxxxx,A,B*Command207xxxxxxx,A,B*
The * symbol marks the beginning and end of the syntax and is also used as a
separator between commands.
07xxxxxxxx, A, B
In this string:
07xxxxxxx represents the phone number (up to 18 digits)
A used to enable (1) or disable (0) the voice call in case of alarm
B used to enable (1) or disable (0) SMS notification in case of alarm
Examples:
To set the first phone number 0710123456 and to activate only the SMS
notification in case of alarm and to set the second phone number 0720654321
and to activate only the voice calling, then the SMS message to be sent to the
system will have the form:
*6666*510710123456,0,1*520720654321,1,0*
In this Syntax:
• 6666 is the default system (administrator) password
• 51 is the command to set the first phone number
• 0710123456 is the phone number
• 0 the phone call function is disabled
• 1 the SMS function enabled
23
English