Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
Press again the key ↑ to select the second option. Press the key ↓ to
•
choose between On and Off. If you select On, in case of alarm, a voice
message will be sent to the respective phone number.
Press again the key ↑ to select the third option. Press the key ↓ to choose
•
between On and Off. If you select On, in case of alarm, an SMS will be
sent to the respective phone number.
•
Press √ to confirm.
Add/Delete remote controls
Add new remote control
•
In the main menu, select: Parts-> Remote-> Add.
•
On the screen, the message Synchronising will show up. The system
enters the pairing mode and counts the remaining pairing time (maximum
20 sec.).
•
Press a button on the remote control to send a signal to the control panel.
•
On the screen, the message Device code has been learnt will show up if
the remote control was successfully paired.
Delete remote control
•
In the main menu, select: Parts-> Remote->Delete
•
Use the keys ↑ and ↓ to reach the remote control that need to be deleted.
•
Press √ to confirm.
Delete all remote controls
•
In the main menu, select: Parts-> Remote->Delete all
•
The total number of learned remote controls is displayed.
Press √ to confirm.
•
Add/Delete wireless sensors
Add sensor
•
In the main menu, select: Parts->Detector->Add
18
Tabla de contenido
