Electrical Specifications - Velleman DVM6243 Instrucciones De Funcionamiento

4.4 Electrical Specifications

L (inductance)
Range Resolution
2mH 1µ H
20mH 10µ H
200mH 100µ H
2H 1mH
C (Capacitance)
Range Resolution
2nF 1pF
20nF 10pF
200nF 100pF
2µ F 1000pF
20µ F 0.01µ F
200µ F 0.1µ F
Temperature coefficient:
Inductance:
Capacitance:
5. Accessories
Test leads, battery, operating manual, holster
5.1 How to use the holster
The holster is used to protect the meter and to make the measurement more comfortable. It comes with two stands
installed together. The figure shows how to use the holster to:
1) Support the meter with a standard angle. (fig. a)
2) Support the meter with a small angle using the little stand. (fig. b)
3) Hang the meter on the wall using the little stand. (fig. c)
Take the little stand off from the backside of the large stand and insert it into holes located upper on the holster.
Fig. a
DVM6243
Accuracy
+ 2% of full scale + 1 digit
+ 2% of full scale + 1 digit
+ 2% of full scale + 1 digit
+ 5% of full scale + 1 digit
Accuracy
+ 1% of full scale + 1 digit
+ 1% of full scale + 1 digit
+ 1% of full scale + 1 digit
+ 2% of full scale + 1 digit
+ 2% of full scale + 1 digit
+ 2% of full scale + 1 digit
Range 2mH, 20mH, 200mH
Range 2H 0.5% / °C.
Range 2nF, 20nF, 200nF 0.1%/°C
Range 2µ F, 20µ F, 200µ F 0.2%/°C
Fig. b
Test
Frequency
900Hz
900Hz
900Hz
900Hz
Test
Frequency
900Hz
900Hz
900Hz
900Hz
90Hz
90Hz
0.2%/°C
4
Current through
inductance under
test
150µ A
150µ A
150µ A
150µ A
Voltage across
Capacitance
under test
150mV
150mV
150mV
150mV
150mV
15mV
Fig. c
VELLEMAN