Restube PFD Manual De Uso página 19

Empty the bladder completely (#2)
• Open the safety toggle
• Open the cap of the mouthpiece
• To release the gas from the bladder, plug the back of the cap
into the oral valve
• Fully release gas by folding or rolling the bladder
• Close the cap of the oral valve
The CO2 cartridge (#2)
#1
RESTUBE only guarantees functionality when using the original
RESTUBE-CO2-Cartridge.
• Remove any dirt (e.g. sand).
• Remove protective cover from the CO2 cartridge.
• Unscrew the empty CO2 cartridge and dispose of with
residual waste.
• Fold away release lever to avoid piercing the new CO2 cartridge.
• Place the new green securing clip on the red indentation on
the trigger mechanism.
• Screw the new original-RESTUBE-CO² cartridge tightly and up
to marking into the trigger mechanism.
• Slide protective cover onto the CO2 cartridge.
The bladder
NOTICE
Pointed or sharp objects can damage the valve! The bladder can only be
folded away correctly when there is no gas in it.
• Spread out the bladder so that the trigger mechanism is in
center on the top of the bladder.
Neck belt (#3)
• Flip the neck belt to the back.
Vertical fold (#4)
#3
• First fold the right then the left part of the bladder downwards
along the drawn through vertical folding lines.
•
•
•
•
#4
•
•
#5
Zigzag fold (#5)
• Fold over the bottom end of the bladder where the trigger
mechanism is located to the back along the first solid line.
• Fold over the next part to the front along the dotted line.
• Continue until you reach the bag.
NOTICE
• The bladder is correctly folded if the CO2 cartridge is on
the outside
19