1. Safety notes
Important notice to begin
50N (DIN EN ISO 12402-5 / DIN EN ISO 12402-6)
50
PFD by RESTUBE is only intended for use by good swimmers in riparian or coastal
areas or where help and rescue is in the immediate vicinity. These buoyancy aids
are comfortable to wear but not suitable for turbulent waters. It cannot be assumed
that the user is supported safely over a prolonged period. The swimming aids do not
have enough buoyancy to protect people who cannot help themselves and require
the active participation of the user. No lifejacket!
Read the product information carefully before using the product!
Observe the notes inside the product and on the waist strap tag!
Check RESTUBE before each use, see chapter 2.
Should you detect defects during inspection, please contact the dealer/manufacturer.
Never attempt to repair RESTUBE by yourself!
Always carry the QuickCheckGuide when using the product!
Declaration of confirmity:
PFD by RESTUBE
... only works as a floating device when it is completely inflated.
... only guarantees functionality when using the original RESTUBE-CO2-Cartridge.
... is not suitable for temperatures below 4°C.
... only wear RESTUBE on top of clothing, so that the trigger is accessible and the
floating device is not prevented from inflating!
... requires active use by the user and is therefore not suitable for people who
are physically or mentally incapable of swimming.
... has a supporting function in water, but does not provide protection in case of
unconsciousness.
A slight trigger delay is possible in temperatures below 15°C. Carrying additional weights or
clothing reduces the perceived buoyancy of RESTUBE. Make sure that supervision is nearby. Only
put yourself in situations with RESTUBE that you could handle safely without the product.
2. Operation and maintenance
Check the product's readiness for use (trigger and cartridge) before each use!
•
•
ATTENTION
For experienced swimmers heavier than 40kg.
Practice the use of personal buoyancy aids yourself and with your child as it can stay afloat with
this buoyancy aid.
16
www.restube.eu/declaration
NOTICE
Open the pocket and verify that the green securing clip is attached to
the side of the trigger mechanism.
>>> If the securing clip is missing, the CO2 cartridge may be
empty. In this case, unscrew the CO2 cartridge.
>>> If the cartridge is pierced at its opening, it is empty and
must be replaced.
Verify that the bladder is in the correct position in the pocket.
>>> The nut on the trigger mechanism must face the label
with the nut symbol sewn into the pocket.
>>> The release lever must not be obstructed