Enlaces rápidos
U P
C
®
®
ASME A112.18.1 / CSA B125.1
NSF-61
ICC/ANSI A117.1
Models/Modelos/Modèles
4540 & 4578 Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant de
débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
TWO HANDLE MINI-WIDESPREAD
53907
LAVATORY FAUCETS
LLAVES DE LAVAMANOS DE DOS MANIJAS
DE MINI-EXTENSIÓN
ROBINETS DE STYLE "À ENTRAXE LONG" À
DEUX POIGNÉES POUR LAVABO STANDARD
3/32" (2.38mm)
L
53907
1
L
11/10/08 Rev. B
Manuales relacionados para Delta 4540 Serie
Resumen de contenidos para Delta 4540 Serie
- Página 1 • To READ ALL warnings, care, and maintenance information. • To purchase the correct water supply hook-up. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar. • LEER TODOS los avisos, cuidados, e información de mantenimiento.
-
Página 2: Cleaning And Care
MAKE ANY OTHER WARRANTY OF ANY KIND, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement This warranty excludes all industrial, commercial &... - Página 3 Model / Modelo / Modèle 4540 H240L (Available After May 1, 2006) RP42581L Lift Rod Finial Pomo de la barra de alzar Grain de la Tirette RP47948 Set Screw Tornillo de Ajuste RP41588L Vis de Calage Lift Rod Barra de Alzar Tige de Manoeuvre RP41896 Glide Ring...
- Página 4 Model / Modelo / Modèle 4578 RP41574L Lift Rod Finial Pomo de la barra de alzar Grain de la Tirette RP41588L Lift Rod Barra de Alzar Tige de Manoeuvre RP53347L RP26148 Aerator Bonnet Nuts Aireador Bonetes/Capuchones Aérateur Chapeaux filetés RP24097 1/4 Turn Stop Parada (Tope) a un 1/4 de Rotación...
- Página 5 F RO NT F RO N T Insert body (1) through sink and snap into place using plastic Remove "umbrella" (1) and be sure snap rings seat in bases (2). "umbrella" (2). NOTE: The front of the valve is labeled (3). Install gasket (3), base (4), and spout (5).
- Página 6 1/2" (12.7mm) IPS 3/32" (2.38mm) Choose hook-ups for 1/2" I.P.S. connections: To install the handles (1): be sure glide ring (2) is properly seated in bottom of handle before installing. Thread stem (1) Ball nose riser (3/8" O.D. copper tubing), or extender (3) into valve stem (4).
- Página 7 Apply silicone to underside of flange (1). Insert Remove pivot nut (1). Install horizontal rod Remove stopper (1) and flange (2). body (2) into sink. Screw flange (1) into body (2). (2) and stopper (3) as removable (4) or non-removable (5). Hand tighten pivot nut (1). Screw nut (1) all the way down.
-
Página 8: Mantenimiento
Remove aerator (1) and turn faucet handles (2) all the way on. Maintenance Turn on hot and cold water supplies (3) and flush water lines If faucet leaks from spout outlet–Shut off water supplies– for one minute. Replace Seats and Springs (1).* Important: This flushes away any debris that could cause damage to internal parts.