Enlaces rápidos

Models/Modelos/Modèles
4578 Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Delta facile-
ment, vous devez:
• LIRE TOUTES les instructions avant de
débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
www.deltafaucet.com
TWO HANDLE MINI-WIDESPREAD
539 7
LAVATORY FAUCETS
LLAVES DE LAVAMANOS DE DOS MANIJAS DE
MINI-EXTENSIÓN
ROBINETS DE STYLE "À ENTRAXE LONG" À
DEUX POIGNÉES POUR LAVABO STANDARD
3/32" (2.38mm)
539 7
1
2/6/12 Rev. C
loading

Resumen de contenidos para Delta 4578

  • Página 1 • To READ ALL warnings, care, and maintenance information. • To purchase the correct water supply hook-up. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar. • LEER TODOS los avisos, cuidados, e información de mantenimiento.
  • Página 2 MAKE ANY OTHER WARRANTY OF ANY KIND, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement This warranty excludes all industrial, commercial &...
  • Página 3 RP41574 Model / Modelo / Modèle 4578 Lift Rod Finial Pomo de la barra de alzar Grain de la Tirette RP41588 Lift Rod Barra de Alzar Tige de Manoeuvre RP53347 RP26148 Contact your distributor for handle and Aerator Bonnet Nuts accent options/finishes.
  • Página 4 F RO N T FRO N T Insert body (1) through sink and snap into place using plastic Remove "umbrella" (1) and be sure snap rings seat in bases (2). "umbrella" (2). NOTE: The front of the valve is labeled (3). Install gasket (3), base (4), and spout (5).
  • Página 5 1/2" (12.7mm) IPS Choose hook-ups for 1/2" I.P.S. connections: (1) Ball nose riser (3/8" O.D. copper tubing), or (2) 1/2" I.P.S. faucet connector Use the enclosed coupling nuts (3) with the ball nose risers (1). Do not overtighten. Escoja las conexiones para conexiones IPS de 1/2": (1) Tubo montante bola-nariz (tubería de cobre 3/8"...
  • Página 6 Apply silicone to underside of flange (1). Insert Remove pivot nut (1). Install horizontal rod Remove stopper (1) and flange (2). body (2) into sink. Screw flange (1) into body (2). (2) and stopper (3) as removable (4) or Screw nut (1) all the way down. non-removable (5).
  • Página 7 Remove aerator (1) and turn faucet handles (2) all the way on. Maintenance Turn on hot and cold water supplies (3) and flush water lines If faucet leaks from spout outlet–Shut off water supplies– for one minute. Replace Seats and Springs (1).* Important: This flushes away any debris that could cause dam- age to internal parts.
  • Página 8 53907 Rev. C...