Check; Youtube; Onezone Thermostat; Thermostat Icons - Airzone ONEZONE Manual De Instalación

CHECK

Once the OneZone Damper and the thermostat are installed, it is suggested to check the system operation. To do that, follow
the steps:
1. Set the AC unit to run.
EN
2. Select the same operating mode as selected in the AC.
EN
3. If the mode is set to heat, increase the temperature selection to the maximum. If the mode is cool, lower the
temperature to the minimum. This action will force the damper to the open position.
FR
4. Power off the OneZone thermostat and verify that the damper stays open
IT

YOUTUBE

PT
You can have a better understanding on how easy it is the installation by watching the following
video: https://www.youtube.com/watch?v=fZTJDdTEbbw
DE

ONEZONE THERMOSTAT

THERMOSTAT ICONS

The Home Screen options for the Thermostat are:
1. Time. Displays the current time.
2. Eco Mode. Indicates Eco mode is activated.
3. Cooling operation mode. Indicates that the Cooling mode is the current operation mode.
4. Heating operation mode. Indicates that the Heating mode is the current operation mode.
5. Selection arrows. Press
6. Communication Icon. Displays communications between the Thermostat and the damper actuator.
7. Current Set point. Displays the current set point.
8. Airzone Icon. Used to enter another menu or confirm a value.
9. On/Off icon. Enables turning the air conditioning On or Off in the zone where the Thermostat is installed.
10. Low Battery. Displayed when batteries have run low. It has approximately 2 weeks of life left.
8
13
12
11
9
10
(Up) or (Down) to adjust manually the temperature set point by increments of 1ºF (0.5ºC).
14
1
2
3
8 6
7
4
5