NOTE: Extension angles are not used for 60" models. Cut extensions to length for
54" models and paint exposed metal.
5. Center the tire rack between LH and RH sides of the
platform (FIG. 9-1).
6. For 27" platforms, position tire rack inward 1/2" from
the butt edge or top edge of the ramp (FIG. 9-2). For all
other platforms, center the tire rack between the front
and back edges of the load carrying surface.
LIFT CORPORATION Sht. 9 of 32 DSG#
TIRE RACK
PLATFORM
CENTER
TOP EDGE OF
RAMP OR BUTT
EDGE
POSITIONING TIRE RACK TO PLATFORM CENTER
(DRIVER SIDE TIRE RACK SHOWN)
POSITIONING TIRE RACK TO PLATFORM EDGE
(27" PLATFORM SHOWN)
M-15-26
Rev. A Date: 10/30/18
PLATFORM
FIG. 9-1
BACK EDGE OF
PLATFORM
FIG. 9-2