Maxon 296665-01 Manual De Instrucciones página 10

7. Place the movable cross member on the extension
angles at the length "B" dimension. Center between
the ribs under the platform, if possible (FIG. 10-1). See
TABLE 10-1 for length "B" dimension.
8. Verify the platform will close with tire rack installed be-
fore continuing.
9. Check for obstructions before drilling tire rack mounting
holes.
LIFT CORPORATION Sht. 10 of 32 DSG#
LIFTGATE
MODEL
54"
60"
81"
B
POSITIONING MOVABLE CROSS MEMBER
(EXTENSION ANGLES SHOWN)
MOVABLE
CROSS
MEMBER (B)
36"-42"
48"-50"
66"-70"
TABLE 10-1
M-15-26
Rev. A Date: 10/30/18
EXTENSION
ANGLES
(STAKEBED
ONLY)
18-1/2"
FIG. 10-1
MOVABLE
CROSS
MEMBER