Maxon 296665-01 Manual De Instrucciones página 11

NOTE: For steel or aluminum platforms, do step 10. For steel grating platforms,
do step 11.
10. For steel or aluminum platforms, use the 2 cross members
as a guide to match drill four 3/8" holes in the platform as
shown in FIG. 11-1. Two mounting holes are required for
each cross member.
TIRE RACK
11. For steel grating platforms, use the spacing
of the grating and cross member mounting
holes as a guide to drill four 3/8" holes in the
cross members as shown in FIG. 11-2. Two
more mounting holes, spaced for u-bolts are
required for each cross member.
TIRE RACK
CROSS
MEMBER
LIFT CORPORATION Sht. 11 of 32 DSG#
CROSS
MEMBER
DRILL 3/8" HOLES
(4 PLACES)
DRILLING HOLES IN PLATFORM
(STEEL PLATFORM SHOWN)
DRILL 3/8" HOLES
(8 PLACES)
DRILLING HOLES IN CROSS MEMBERS
(STEEL GRATING PLATFORM SHOWN)
FIG. 11-2
M-15-26
Rev. A Date: 10/30/18
FIG. 11-1
MOVABLE
MOVABLE
CROSS
MEMBER
CROSS
MEMBER