Tabla de contenido
Idiomas disponibles
Idiomas disponibles
14. Install a self-tapping screw (kit item)
in each end of the movable cross mem-
ber. Tighten self-tapping screws to en-
sure that cross member is tight against
tire rack extensions (FIG. 14-1).
TIRE RACK EXTENSIONS
15. If platform requires use of extension
angles (kit items), install self-tapping
screws in the ends of extension angles
where they overlap (FIG. 14-2).
EXTENSION ANGLES
LIFT CORPORATION Sht. 14 of 32 DSG#
MOVABLE
CROSSMEMBER
ATTACHING MOVABLE CROSS MEMBER
TO EXTENSIONS
FIG. 14-1
ATTACH EXTENSION ANGLES
M-15-26
Rev. A Date: 10/30/18
#12 SELF-TAPPING
SCREWS
# 12 HEX SELF-
TAPPING SCREW
(4 PLACES)
FIG. 14-2
Tabla de contenido
