Installation; Transportation; Lifting And Handling; Positioning - ifi 750 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

2 INSTALLATION

2.1 TRANSPORTATION

The Panorama is usually shipped using overland transport.
Normal packaging consists of a polyethylene cover; the company provides special packaging on request.

2.2 LIFTING AND HANDLING

The display unit should be lifted out of the transporting
CAUTION!
The fork part of the truck must be at least
1 m / 3.2 ft long.
Position the display unit correctly by
placing its centre of gravity in the middle of
the support area on the forks of the truck.
Once the product is on the ground, we recommend
the packaging is removed immediately in order to
check the item is intact and has not been damaged
during the transportation process.
NOTE:
T h e c a r r i e r s houl d be noti fied of
any damage immediately. Under no
c i r c u ms t a n c e s , how ev er, m ay the
damaged display unit be returned to
the manufacturer without prior notice or
written authorisation.

2.3 POSITIONING

Before installing the product, remember the following
instructions:
- Remove all packaging protecting the Panorama.
- Position the Panorama in a dry area which is free
of dust.
- Enough space must be left around the bar
Panorama for the operator (so that he/she can
use all its functions properly), for the customer
(if applicable) and for any routine maintenance
procedures to be performed.
- In versions which have an inbuilt condenser unit,
a space of at least 50 cm must be left by the
ventilation grilles so as to allow air to pass through
Place the display unit in the chosen position, remembering to remove the two strips at the base of the unit
Fig.5
Fig.6
Fig.7
31
Tabla de contenido
loading

Este manual también es adecuado para:

10001250150017502000

Tabla de contenido