Tabla de contenido
Idiomas disponibles
Idiomas disponibles
New Address
115
Enter Address
(Enter)
New Address
115
Wait please
New Address
115
Successfully
(Esc)
2. Reading the address of the device
Press the
(Esc) button several times to exit back to the main programming menu in case
you have entered other menus earlier.
Use the
(Up) and
Set address
Check address
Read parameters
Save parameters
Press the
(Enter) button to start reading the address.
While the reading procedure is running on, the screen displays:
Address
Wait please...
After the reading is over the programmer displays on the right up corner the address of the
device.
If the reading is successful the screen displays message:
Address
Successfully
If the reading is unsuccessful the screen displays message:
Address
Unsuccessfully
The address is set.
Press the "Enter" button to write the address to the connected device.
Wait until the writing procedure runs on.
The new address is successfully set.
Press "Esc" button several times to return to the main menu.
(Down) buttons to choose the "Check address" menu.
>
>001
>
41SPG000 – Instruction Manual
12
Tabla de contenido
