Sennheiser IS 380 Instrucciones Para El Uso página 9

SETTING UP THE TRANSMITTER
Place the transmitter near your television set or hi-fi system.
PUTTING THE TRANSMITTER INTO OPERATION
Use the supplied cable to connect socket
with the headphone socket on your television set or hi-fi system.
NOTE
If your television set does not have a headphone socket, the sound signal can also
be taken from the SCART socket (video recorder socket). Please order the
suitable Sennheiser adaptor (Cat. no. 47874) from your Sennheiser dealer.
Connect the supplied plug-in mains unit to socket
transmitter, then plug the mains unit into the mains.
16
on the TI 380 transmitter
on the TI 380
LEVEL CONTROL OF THE TRANSMITTER
Adjust the volume of your hi-fi system or television set to a middle position.
The TI 380 transmitter features an automatic modulation control which
prevents overmodulation.
PUTTING THE RECEIVER INTO OPERATION
Insert the BA 151 accupack into the compartment in the headphone receiver.
Take special note of the instructions on accupack
operation on pages 20/21 of this manual!
(NB: The BA 151 accupack must be charged for 24 hours before first use!)
SWITCHING ON THE HEADPHONE RECEIVER
Use switch to turn on the headphone receiver. Adjust the volume with
control . The balance control
differences between the left and right channel.
serves to compensate for volume
17