MOTOAIRBAG S164S Manual De Istrucciones página 12


For each subsequent use
connect the activation cable to the D-ring belt before start.
o
Ensure the D-ring belt is properly secured to the motorcycle seat
o
Ensure the seat is properly secured to the motorcycle
o
Contact the manufacturer or authorized dealer if in doubt. MOTOAIRBAG
Perform frequently the following checks and after an activation:

Inspect the MOTOAIRBAG

Inspect the MOTOAIRBAG

Inspect activation cable for signs of damage

Ensure the gas cylinder has not traces of damages, rust or oxidation

Ensure that the gas cylinder is securely screwed to the gas generator (hand-tighten only)

Ensure the D-ring belt is in good condition without signs of damage or wear

Ensure the D-ring belt is properly secured to the motorcycle seat

Ensure the seat is properly secured to the motorcycle

Ensure the zipper for airbag inspection is closed

For model S11 - MAB v2.0c: Check that lateral Velcro is closed. - Check that the activation cable of front airbag is well connected to activation cable
of the rear airbag
MOTOAIRBAG ®
may not work correctly if instructions are not carefully followed.
Contact the manufacturer or authorized dealer if any questions about these instructions
SIZE
Choose the correct size using the maximum "Waist to Shoulder" measurement together the right size of the garment in which the airbag system is
inserted
PRESENCE OF TOXIC SUBSTANCES
As required by EN1621/4:2013 and EN340, MOTOAIRBAG
STORAGE INSTRUCTIONS

Store MOTOAIRBAG ®
in a dry place at temperature below 45°C (113° F).

Do not store MOTOAIRBAG
 Do not store MOTOAIRBAG

Do not store MOTOAIRBAG
MOTOAIRBAG
®
textile vest material for signs of damage
®
airbag system for signs of damage
®
®
near heat sources (e.g. flame, heater, etc.)
®
near sharp or pointed objects
®
with any weight on top
®
may not work correctly if instructions are not carefully followed.
®
CHECK LIST
products are made with no toxic or harmful components,
12