MOTOAIRBAG S164S Manual De Istrucciones página 11

LIMITATIONS – WARNINGS ( Text in compliance with EN 1621/4: 2013)

No protector can guarantee complete protection from injuries
 MOTOAIRBAG ®
may not provide protection in all circumstances, for example:

During the first impact between the motorcycle and the obstacle

In the event of an accident without separation from the motorcycle

The protector is compatible with rigid protectors certified in compliance with EN1621/1 or EN1621/2 when they are worn properly under
®
MOTOAIRBAG

Always fasten the front buckle. If the front buckle of the harness is not fastened, the protector will not stay in proper position

Do not tamper with any components of MOTOAIRBAG

The protector works only if the activation cable is connected to the D-ring belt installed on the motorcycle seat

Connect the activation cable to the D-ring belt and to no other point on the motorcycle

Do not wear anything on top of the protector (e.g. backpacks, raincoats, purses, other clothing, etc..) that can hinder or obstruct the opening of the
protective airbag.

Do not tamper with or modify the hardware which secures the airbag system inside the vest and do not obstruct the movement of these areas.

MOTOAIRBAG ®
provides protection only when inflated.
 ®
MOTOAIRBAG works only if the activation cable is connected to the motorcycle.
 Protect MOTOAIRBAG ®
 Use MOTOAIRBAG ®
only when temperatures are between 0°C (32° F) to 45°C (113° F)

Keep out of reach of children
 Do not recharge MOTOAIRBAG

Do not operate without gas cylinder or with perforated bottle

Do not activate without gas cylinder

Use only MOTOAIRBAG ®
 ®
MOTOAIRBAG can be worn by the driver and the passenger
MOTOAIRBAG ®
satisfies safety condition only if it is correctly used and in a perfect state of repair.
The manufacturer disclaims all liability for any damage / consequences resulting from improper use or non-application of the instructions in
this manual.
HOW TO CONNECT MOTOAIRBAG
 The first time MOTOAIRBAG

Install the D-ring belt according to the pictures
The D-ring belt shall be installed behind driver seat. When passenger is present, a second D-Ring belt shall be present on the saddle, behind
passenger seat.
®
from pointed or sharp objects (e.g. pins, needles, blades, etc.).
®
after an impact.
brand spare parts
®
TO YOUR MOTORCYCLE
®
is used, connect the D-ring belt around the motorcycle seat using the instructions in this manual.
as tampering may cause a malfunction
11