Sherwood RX-4109 Instrucciones De Funcionamiento página 13

Adjusting the tone (bass and treble)
8.
Enter the tone mode.
9.
At the desired tone mode, adjust the tone as desired.
10.
To listen to a program source without the tone effect.
Adjusting the sound volume balance
11.
Enter the balance mode.
12.
Adjust the sound volume balance between the left and right speakers.
All manuals and user guides at all-guides.com
• Each time this button is pressed, the
▄ Note
• When the tone direct function is activated, the
• If the tone display disappears, start from the step
▄ Note
• Extreme settings at high volume may damage
• In general, the bass and treble levels are
• "TON DIR" is displayed, "DIRECT" lights up and
• To cancel the tone direct function, press this
• "BAL" and the balance level is displayed for 3
• If the balance display disappears, start from the
▄ Note
• In general, the balance level is adjusted to 0.
13
corresponding tone mode is selected and shown
for 3 seconds as follows:
tone mode cannot be entered and "TON DIR"
flickers for 2 seconds.
8 again.
your speakers.
adjusted to 0.
the sound that bypasses the tone circuitry will be
heard.
button again to display "TON CTRL", and then
"DIRECT" goes off.
seconds.
step 11 again.