Operations; Listening To A Program Source - Sherwood RX-4109 Instrucciones De Funcionamiento

Operations

LISTENING TO A PROGRAM SOURCE

Before operation
• Turn the power on.
1.
In the standby mode, turn the power on.
2.
Switch the desired speakers on.
or
All manuals and user guides at all-guides.com
• This unit enters the standby mode and the STANDBY
indicator lights up.
This means that the receiver is not disconnected
from the AC mains and a small amount of current
is retained to support the memorized contents and
operation readiness.
• In the standby mode, the STANDBY indicator lights
up. This means that the receiver is not disconnected
from the AC mains and a small amount of current
is retained to support the memorized contents and
operation readiness.
• When the POWER ON button on the remote
control is pressed, this unit is turned on to enter the
operating mode.
• In the standby mode, if an INPUT SELECTOR button
on the remote control or the front panel is pressed,
the unit is turned on automatically and the desired
input is selected.
• In the operating mode, when the STANDBY button
on the remote control is pressed, then it enters the
standby mode.
• Then the corresponding speaker indication("SPK
A(or/and) B") is displayed and the sound can be
heard from the speakers connected to the selected
speaker terminals.
• When using the headphones for private listening,
press the corresponding SPEAKER button to switch
off both A and B speakers.
11