SATA HF0801 Manual Del Uso página 6

Idiomas disponibles

3） Cup the mask under the chin with the nose clip upwards, pull the lower headband up and place it at the base of the neck and pull

the upper headband up and place it above the ears.

4） Place two of the fingertips on the top of the metal nose clip, gently conform/press the nose clip across the bridge of the nose by

pressing down with fingers until.

Please use both fingertips instead of one fingertip to conform/press the nose bridge, otherwise, it may result in improper

snugness and reduce the protective performance of the mask

5） The user should test airtightness of the mask every time before wearing it This can be done by completely covering the mask with

hands and exhale, during which please be careful not to move the mask. If air leakage is felt around the nose bridge, re-adjust the

nose clip according to step 4. If the air leakage is felt around the edge of the mask, adjust the position of headband[s].

If you are unable to achieve a good facial snugness, you should contact the supervisor instead of entering into the contaminated area.

Note:

Please refer to the Operating Instructions and Wearing Instructions for proper use and maintenance of this product

Manufacturer: Dongguan Makrite Industrial Ltd

HF0801

中文