Software Update; Usb Connection - PNI HUNTING 2C Manual De Usuario

SOFTWARE UPDATE

1. Copy the 3 files for software update on the micro SD card;
Note: We recommend using a 1 or 2GB card
2. Insert the MicroSD Card into the camera
3. Insert the battery into the camera or plug it into a power source via the USB cable
4. Press and hold the Power/Navigation button
5. Release the button
6. Then press and hold Menu/OK
Note: The led indicator does not blink but remains lit.
7. Release the button
8. If the update was successful, the led indicator will turn off;
9. Remove the batteries or remove the power cord;
10. Reinsert the batteries and turn on the camera. Procedure completed.
Note: Do not interrupt the power supply while updating the software; otherwise, the camera
can only be turned on after a software update via a PC

USB CONNECTION

When the camera is connected via USB, press and hold the button
and the led indicator will light up; then the following interface appears
Press and choose DC in or PC connection; press
1. DC power supply
The camera enters the main interface of the Test mode
2. PC connection to read SD card
The interface below appears on the camera screen. Now you can read the contents of the
SD card on your PC.
11
when you see the LED blinking
button
after you see the ISP icon on the screen
, the camera will beep
, the camera will beep
to confirm the setting.
User manual