Connecting Input Av Signal Using Scart In - Packard Bell Easy Guia Del Usuario

All manuals and user guides at all-guides.com
Easy DVD Recorder User's Guide

Connecting Input AV signal using SCART IN

The SCART IN connector included on your
device, such as a DVD player or a VCR. However, when this device is in use, or simply turned
on, you must turn it off before watching TV channels (using the
To display or record video inputted via the SCART IN connector (e.g, the AV signal from a
DVD player or a VCR with SCART OUT connector), press SOURCE on the remote control and
select SCART mode.
If the SCART IN device you want to connect is a CANAL+ analog decoder, you must configure
Easy DVD Recorder
the
General Setup screen and select ON for the "CANAL+ Analog Decoder" option. In this way,
when you select a CANAL+ scrambled signal, the CANAL+ decoder will automatically start
Easy DVD Recorder
and the
change to any other channel, the CANAL+ decoder will automatically shut down.
Even when the DVD recorder is in STAND-BY status, the AV signal from the external AV signal
source can be normally played on the TV set via the SCART IN and SCART OUT connectors on
the DVD recorder.
1.
External AV signal source (e.g. DVD player, VCR, CANAL+ decoder, etc.)
2.
Easy DVD Recorder
Easy DVD Recorder
accordingly. Press SETUP on your remote control to access the
will automatically send unscrambled signal to the TV. If you
allows you to connect a video
Easy DVD Recorder
tuner).
16