Kohler K-1737 Guia De Instalacion página 3

Temperature
Sensor
5"
(12.7 cm)
4-1/2"
(11.4 cm)
Steam
Head
K-1569/K-1669
21" (53.3 cm)
5" (12.7 cm)
Steam
Head
6"
(15.2 cm)
21" (53.3 cm)
5" (12.7 cm)
Steam
Head
6"
(15.2 cm)
Steam Hardware Locations
WARNING: Risk of scalding. Do not locate the steam head near a seat or bench, as the steam head
is hot during operation and may scald the user if touched.
Review the layout determined during the steam generator installation. See the steam generator installation
guide for more information.
Modules - Single Steam Head
NOTICE: The temperature sensor and user interface must be mounted on the wall opposite the steam
head. For optimum performance, reference the diagrams above. Locate the steam head 6" (15.2 cm) above
the floor and a minimum of 4-1/2" (11.4 cm) from the threshold. The steam head should always be located
as far away from the seating area as possible.
Kohler Co.
12"
(30.5 cm)
Steam
6" (15.2 cm)
Head
Temperature
Sensor
4-1/2"
(11.4 cm)
Drain End
K-1683/K-1684
Temperature
Sensor
4-1/2"
(11.4 cm)
Drain End
K-9486/K-9489
Temperature
21"
Sensor
(53.3 cm)
5"
(12.7 cm)
11"
(27.9 cm)
6"
(15.2 cm)
Steam
Head
K-1687
Steam
Head
Drain End
Steam
Head
Drain End
3
Temperature
Sensor
5"
(12.7 cm)
11"
(27.9 cm)
6"
(15.2 cm)
Steam
Head
K-1688
Temperature 21" (53.3 cm)
Sensor
4-1/2"
(11.4 cm)
K-1681/K-1682
Temperature 21" (53.3 cm)
Sensor
4-1/2"
(11.4 cm)
K-9488/K-9496
21"
(53.3 cm)
Steam
Head
5" (12.7 cm)
Steam
Head
6"
(15.2 cm)
5" (12.7 cm)
Steam
Head
6"
(15.2 cm)
1069332-2-C