Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ELECTRICAL CONNECTIONS
STEP 1:
Make the following Electrical Connections:
a. Connect the black fixture lead to the voltage supply Line
position, Hot.
b. Connect the white fixture lead to the neutral supply
position.
c. Connect the green or green/yellow ground lead to the
supply ground lead.
d. If 0/1-10V Dimming is used, connect the violet lead to
the supply positive dimming lead. If dimming is not being
used ensure to cap off the violet lead.
e. If 0/1-10V Dimming is used, connect the gray lead to the
supply negative dimming lead. If dimming is not being
used ensure to cap off the gray lead.
FCC NOTICE
CAUTION: Changes or modifications not expressly approved could void your authority to use this equipment.
This device complies with Part 15 of the FCC Rules. Operation to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the device is operated in a commercial environment. This device generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this device in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
INDUSTRY CANADA STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. In addition,
this device complies with ICES-003 of the Industry Canada (IC) Regulations.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
© 2019 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content
is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree
registered trademarks of Cree, Inc. ZR14™, ZR22™ and ZR24™ are trademarks of Cree Lighting, A company of IDEAL
INDUSTRIES. Armstrong® is a registered trademark of AWI Licensing LLC.
3 of 3
LINE
NEUTRAL
and the Cree logo are
®
DRIVER ASSEMBLY
BLACK
WHITE
www.creelighting.com
LPN00678X0001A0_A
VIOLET
GREY
Tabla de contenido
