Additional Functions - UFESA PV3200 Manual De Instrucciones

When ironing delicate fabrics (synthetics,
silk, velvet etc.), keep the iron a few
centimetres away from the garment to
prevent damage.
ENDING THE IRONING
1
Turn the Temperature Dial counter-clockwise to
"MIN" position. The will turn off.
2
Set the steam control to
3
Unplug the unit.
4
Empty the water tank. See "Emptying The Water
Tank".
5
When the iron has cooled completely, store it
vertically in a safe place.
Emptying The Water Tank
● Set the Steam Control to
● Unplug the unit.
1
Hold the iron upside down and shake it gently to
remove the remaining water.
2
When the soleplate is still hot, press the Steam
Burst Button to drain the water tank.
3
Press the Spray Button to release any remaining
water.
● Before storing the iron, make sure the Steam
Control is set to position.

Additional Functions

ANTI SCALE SYSTEM
The appliance has a build-in anti-limescale container.
It is designed to reduce the build-up of limescale which
occurs during steam ironing.
The build-in anti-scale cartridge
prolongs the service life of the iron.
However, it will not completely stop the
natural process of limescale build-up.
SELF CLEANING
This function provides for removal of scale and mineral
built-up in the Steam Chamber. The performance of
the iron largely depends on the water hardness and the
position.
C
position.
frequency of performing the self-cleaning process. It is
recommended to perform self-cleaning at least once
a month or more regularly.
1
Fill the water tank as described in "Fill with water"
section. Fill the water tank halfway.
2
Place the iron in an upright position.
3
Connect the iron to a suitable power source.
4
Turn the Temperature Dial clockwise to "●●●".
5
Heater indicator light will come on.
The light will go off once the required
temperature is reached.
● The iron is ready for use.
6
Wait for one more cycle. The light will go on and off.
7
Turn the Temperature Dial counter-clockwise to
"MIN" position.
8
Unplug the unit.
9
Hold the iron horizontally over a sink.
10
Press and hold the Self-Cleaning Button.
11
Steam and boiling water will flow out of the holes
on the soleplate, washing away the scales and minerals
accumulated inside the steam chamber.
12
Sway the iron gently until the water tank is empty.
13
Release the Self-Cleaning Button when self
cleaning is complete.
14
Place the iron on a flat and level surface and allow
it to cool down completely.
15
Wipe the soleplate with a cold damp cloth.
The water flowing out of the soleplate
is very hot. Take extra care when
performing the self-clean operation.
ANTI DRIP
● The anti-drip system is designed to prevent water
leaking from the soleplate when the iron is not
sufficiently hot.
● When engaged, the anti drip system may produce
a clicking sound, particularly during heat-up or when
the iron is cooling down. This is normal and indicates
that the system is working correctly.
AUTO OFF
The iron has an auto-off feature in vertical and
horizontal position which activates automatically when
the appliance is plugged in and left unattended.