Transport; Maintenance - GAYNER ECI Serie Instrucciones De Uso

TRANSPORT

- The transport vehicle must be parked on a level surface. It must be stationary to prevent it from moving whilst loading the ECI
tower.
- Make sure the vehicle capacity, the loading space and chains or straps used are sufficient to withstand the weight of the tower.
- AThe tower must be secured to the vehicle with straps or slings of adequate load capacity.
- La Torre ECI debe estar bien fijada al vehículo de transporte mediante cadenas o correas con suficiente capacidad de carga.
- Place the ECI tower against the vehicle. Use the transportation wheels to help load the tower onto the vehicle.
- The front legs can be inserted in the back of the tower base to manoeuvre it up ramps.

MAINTENANCE

- The ECI lifting tower is released from the warehouse already greased and ready to use. It is recommended that you periodically
(depending on the frequency it is used) grease the mast profiles and internal pulleys.
VERY IMPORTANT: Do not grease the brake mechanism. Do not allow oil or grease on the braking surfaces..
- A regular technical inspection of the ECI tower must be carried out (depending on the regulations in your country and the
frequency of use of the tower) by a GAYNER authorised technician, to establish the condition of all its parts..
- Your GAYNER tower is made with high quality long-lasting components. In the event of having to change a component it is
important that it is replaced with an original spare part. GAYNER will not take responsibility for any direct or indirect consequence
due to the incorrect use, carelessness or bad maintenance. The guarantee will be invalid if nonoriginal components are used or if
any modifications are made to the tower.
- Do not replace parts of the tower that are critical to stability or structure with items of different strength or specification. If it
were necessary to replace parts, please contact your dealer or the manufacturer GAYNER.
20