Setting Up And Making A Flux-Cored Weld - Lincoln Electric 180 Serie Manual Del Operador

WIRE FEEDER WELDER (180 MODEL)
.025 GROOVE*
.035 GROOVE*
See Figure B.6
12. CIRCUIT BREAKER – If the rated input current of the machine is
exceeded this circuit breaker will trip. Press to reset.
13. GAS INLET – Shielding gas connects to this inlet.
A. ITEMS NEEDED FOR FLUX
CORED WELDING
1. .035"(0.9mm) Contact Tip
2. Dual Groove Drive Roll.
Wire Diameter & Type
.025"(0.6mm) MIG wire
.030"(0.8mm) MIG wire
.035"(0.9mm) MIG wire
.030"(0.8mm) flux-cored
.035"(0.9mm) flux-cored
.045"(1.1mm) flux-cored
*KP3285-1 May also be used to feed .030"(0.8mm) and .035"(0.9mm) flux-cored wire.

SETTING UP AND MAKING A FLUX-CORED WELD

3. .035"(0.9mm) NR-211MP Flux-Cored
Wire
4. Black Flux Cored gun nozzle
B 4
TABLE B.1
DRIVE ROLLS
Smooth Drive Roll
(Dual Grooves)
Use .025"(0.6mm) Drive Roll Groove
Use .035"(0.9mm) Drive Roll Groove
Use .045"(1.1mm) Drive Roll Groove
FIGURE B.6
12 13
5. Welding Gun
6. Work Cable & Clamp
OPERATION
Drive Roll Part
Number
KP2948-1
KP3285-1*