Installing The Pmxc-Sb Pendant Mount; Figure 2 Model Pmxc-Sb Pendant Mount - Federal Signal CMXC-SB Serie Instrucciones De Instalación

Installation Instructions for Optional Fixture Mounts

Installing the PMXC-SB Pendant Mount

To install the pendant mount on 3/4-inch pipe:
1. Ensure that the mating threads are clean.
2. Thread the pendant mount onto the 3/4-inch pipe and secure it
with the setscrew.
3. Remove the terminal block from the ceiling mount by
removing the two screws securing it to the fixture.
4. For instructions on wiring the beacon, see page 8 for the
DC beacon or page 9 for the AC beacon.

Figure 2 Model PMXC-SB pendant mount

TERMINAL
BLOCK SCREW (2)
Models CMXC-SB, PMXC-SB, and WMXC Series
TERMINAL BLOCK
7