Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation Instructions for Optional Fixture Mounts
Safety Messages to Installers
It is important to follow all instructions shipped with this product.
This device is to be installed by a trained electrician who is
thoroughly familiar with the National Electric Code/Canadian
Electric Code and will follow the NEC/CEC Guidelines as well as
local codes.
The selection of mounting location for the device, its controls and
the routing of the wiring is to be accomplished under the direction
of the facilities engineer and the safety engineer. In addition, listed
below are some other important safety instructions and precautions
you should follow:
•
Read and understand all instructions before installing or
operating this equipment.
•
Never alter the unit in any manner. Safety in hazardous
locations may be endangered if additional openings or other
alterations are made in units specifically designed for use in
these locations.
•
After installation, ensure that all screws are properly tightened.
•
After installation, test the light system to ensure that it is
operating properly.
•
After testing is complete, provide a copy of this instruction
sheet to all operating personnel.
•
Establish a procedure to routinely check the light installation
for integrity and proper operation.
Failure to follow all safety precautions and instructions may result
in property damage, serious injury, or death.
Models CMXC-SB, PMXC-SB, and WMXC Series
5
Capítulos
Tabla de contenido
