Kohler K-9607-R Guia De Instalacion página 10

1
7. Final Connections
CAUTION: Risk of product or property damage. Twisted,
pinched or blocked tubes may cause excess pressure, and can
damage the dispenser tank.
Without depressing the grey button, place the snap-connect fitting
at the end of the (1) blue 1/4" (6 mm) inlet tube onto the left side
plastic fitting on the tank.
Push down on the fitting until it snaps into place.
Slide the flexible (2) white 7/16" (1.1 cm) plastic tube over the
barbed middle fitting on the tank. Push the tube down as far as
possible.
Slide the (3) clear 5/16" (7.9 mm) tube over the right side smooth
fitting on the tank. Push the tube down as far as possible.
Check the tubes to make sure that they are not kinked or
pinched.
112114-2-BE
2
10
3
Kohler Co.