Getting Connected; Mobile Networks; Checking The Network Connection; Turning On The Data Service - Huawei M886 Guia Del Usuario

7 Getting Connected

7.1 Mobile Networks

Your mobile phone will be automatically configured to use your network operator's
2G/3G service (if available) when you turn on the phone for the first time. Note that the
SIM/UIM card must be inserted (some CDMA mobile phones have an integrated UIM
card and do not need a separate UIM card)

7.1.1 Checking the Network Connection

1. Touch > Settings.
2. Touch Wireless & networks
3. Touch Access Point Names to check the network connection.
Your mobile phone will automatically read the access point settings from the
SIM/UIM card (if any). For this reason, do not change the access point
parameters; otherwise, you might not be able to access network resources.

7.1.2 Turning on the Data Service

1. Touch > Settings.
2. Touch Wireless & networks
3. Select the Data enabled check box to turn on the data connection.

7.2 Wi-Fi

Wi-Fi gives you wireless access to broadband Internet. To use Wi-Fi on your mobile
phone, you must have an access to wireless access points (hotspots). Obstacles that
block the Wi-Fi signal will reduce its strength.
7.2.1 Turning On Wi-Fi
1. Touch > Settings.
2. Touch Wireless & networks, and then select the Wi-Fi check box to turn on Wi-Fi.
36
> Mobile networks.
> Mobile networks.