How To Hang Your Ceiling Fan - Fanimation HUGH FPS8332 Serie Manual Del Usuario

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

WARNING

The fan must be hung with at least 7´ of clearance from

floor to blades. (Figure 1)

WARNING

To avoid possible electrical shock, be sure electricity is

turned off at the main fuse box before hanging.

NOTE: If you are not sure if the outlet box is grounded,

contact a licensed electrician for advice, as it must be

grounded for safe operation.

WARNING

It is critical that the outlet box and the screws are

securely anchored to the building structure and capable

of withstanding a load of at least 35 lbs. Failure to verify

that the screws are properly installed could result in the

fan falling. (Figure 2)

1. Securely attach the ceiling junction box acceptable

for ceiling support into the building structure. Junction

box is not supplied with the fan. (Figure 2)

2. Using the ceiling junction box screws and flat

washers, securely attach the ceiling bracket gasket with

ceiling bracket assembly to the ceiling junction box as

shown. (Figure 3)

3. Remove the two screws from the motor assembly,

retain the screws for later and loosen the remaining

screws. (Figure 4)