How To Hang Your Ceiling Fan - Fanimation Pearson PL8018 Manual De Instrucciones

How to Assemble Your Ceiling Fan (continued)
5. Slide the motor coupling cover down until it touches
the top of the motor and assemble ceiling canopy as
shown. (Figure 5)
6. Before installing fan, cut off excess lead wire
approximately 6-9 inches above top of downrod. Strip back
back insulation ½" from end of each wire. (Figure 6)
7. You have now completed the assembly of your new
ceiling fan. You can now proceed with the hanging and
the electrical wiring of your fan.
▲WARNING
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before hanging.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
▲WARNING
The fan must be hung with at least 7´ of clearance from
floor to blade and MUST ONLY be hung in a vertical
downward position from ceiling. (Figure 1)

How to Hang Your Ceiling Fan

Ceiling
Canopy
Ceiling
WARNING:
Do NOT Mount Fan
On Wall Or Floor!
Floor
7
Motor
Coupling
Cover
Figure 5
Figure 6
2 ft min.
from
staircase
or wall
No
less than
7 ft
Figure 1