Fora G20 Manual Del Propietário página 17

If you want to turn off an alarm, find the alarm number by pressing SET
in the setting mode, and then press Main button to change from "ON"
to "OFF".
Congratulations! You have completed all settings!
NOTE:
These parameters can ONLY be changed in the setting mode.

 If the meter is idle for 3 minutes during the setting mode, it will switch off
automatically.
When the alarm is enabled with hour
flashing, press Main button to increase
an hour, followed by pressing SET to
confirm and go to minute setting.
Press SET to confirm and go to the next
alarm setting.If you do not want to set
an alarm, press SET to skip this step.
11