Olympia NC 510 Manual Del Usuario página 25

Error codes during counting:
Please follow the instructions for troubleshooting if one of the following error codes is displayed during counting.
Error code
Recount the banknotes if one of the error codes is displayed.
Set Feeder
The contact pressure can be adjusted if the feeder malfunctions. Remove both safety stickers on the rear of the
unit next to the regulating screw. Turn the regulating screw clockwise to increase the pressure and counter-
clockwise to decrease the pressure. After adjusting place a banknote in the feeder and hold it; when feeling the
strain of the transport rollers the pressure adjustment is correct.
Cause and troubleshooting
A folded or half-note is detected; please remove the
banknote and restart the counting.
Some banknotes are stuck together or are drawn in
together. Recount the banknotes. If FJ is displayed more
often, adjust unit with regulating screw clockwise.
Skewed banknotes; please remove and press RESET.
The banknote is off-size; please remove und press RESET
to resume counting.
Counterfeit or suspect note is detected; please remove and
restart counting. Decrease the test level, if the problem
persists.
OLYMPIA NC 510
- 25 -