Technical Data; Noise And Vibration Data; Vibration Information - Ratio CR800M Traducción De Las Instrucciones Originales

TEChNICAL DATA

Voltage
Power input
No-load speed
Bevel capacity
Stroke length
Cutting capacity, max. thickness
Protection Class
Machine weight

NOISE AND VIBRATION DATA

A weighted sound pressure
A weighted sound power
K & K
PA WA
Wear ear protection when sound pressure is over

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
cutting wood
cutting steel metal
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across a number of days.
Wood
Aluminum
Steel
Vibration emission value a
Uncertainty K = 1.5m/s²
cw
Vibration emission value a
Uncertainty K = 1.5m/s²
cw
C or less.
0
230-240V~50Hz
= 7.33m/s
2
h.cw
= 4.40m/s
2
h.cw
800W
800-3000rpm
±45°
20mm
100mm
20mm
10mm
/II
2.5kg
L : 84dB(A)
pA
L : 95dB(A)
wA
3.0dB(A)
80dB(A)
31