Connect The Drop Cable To The Odu (Psu Port) And Lpu - Cambium Networks PTP 670 Serie Guia De Inicio Rapido

Connect the drop cable to the ODU (PSU port) and LPU

(a) Plug the RJ45 connector into the socket in the unit, ensuring that it snaps home.
(b) Fit the gland body to the RJ45 port and tighten it to a torque of 5.5 Nm (4.1 lb ft):
(a)
(a) Fit the gland nut and tighten until the rubber seal closes on the cable.
(b) Do not over-tighten the gland nut, as there is a risk of damage to its internal components:
(a)
(b)
(b)
Correct
PAGE 24
PTP 670 QUICK START GUIDE
Incorrect